DIY Creative Garden Simple Path Maker Mold

• Material: Plastic
• Size: 40*40*4cm/15.7*15.7*1.58" Approx.
• Laying out the effect posted up like blocks of stones
• So the path is more exotic, to create a style of their own garden path.
• Color: As shown in the picture

Description:
This garden paver mold does not require you to be a professional. Simply prepare the slurry, place it in the wireframe, level it, and set it aside to dry. Lift up the garden mold once it has partially dried and allow the path to dry completely.

The plastic mold can be reused numerous times. It can be used to make a small entrance to the garden or a full pathway.

Concrete pathway molds can be used in gardens, lawns, balconies, patios, and villas. It is possible to create colored paths with it. Simply mix the desired coloring pigment into the cement before pouring it. There's no need to buy expensive equipment or hire a professional. Convenient and practical. Save money while improving the look and feel of your yard.

What Is the Best Way to Use Garden Path Maker Molds?
Step 1:
Mix cement with water, according to package directions. When ready to use, the concrete will be the consistency of oatmeal and thick enough to hold an edge when you slice into it with a shovel.
Step 2:
Fill the paver mold, scooping the concrete in with a shovel and making sure to fill each area.
Step 3:
Using rubber gloves, spread the concrete around the mold, filling in any gaps or low points. Tap the mold with your hand to eliminate any air bubbles.
Step 4:
Following the contours of the mold, smooth out the concrete, wiping away any excess.
Step 5:
Allow the concrete to set for a maximum of five minutes, then carefully remove the mold. For the next stretch, rotate the mold a quarter-turn and place it beside the paver just completed, angling slightly if you're creating a curving pathway.
Step 6:
After letting the concrete cure overnight, fill the cracks with dirt and wash away any excess. Wet the ground around the newly formed pavers to help them settle.